Step 2 Plug in the MegaRAC G3 Card into the Host System and Attach
Internal Cables,
Continued
JP4 and JP5 Chassis/Motherboard Power Switch
JP4 and JP5 can be used in place of the MegaRAC Feature Cable to power on, power off,
and power cycle the motherboard.
Connect a two pin cable from the motherboard's Power (Soft On/Off) header to JP4 on
your MegaRAC G3 card. Connect the chassis power switch to JP5 on your MegaRAC G3
card.
Note:
JP4 and JP5 can be used in place of the MegaRAC Feature Cable to power on, power off,
and power cycle the motherboard.
JP6 MegaRAC G3 Reset Button
You can short this jumper to reset your MegaRAC G3 card.
Pin
1
2
JP7 and JP8 Chassis/Motherboard Reset Switch
JP7 and JP8 can be used in place of the MegaRAC Feature Cable to reset the
motherboard.
Connect a two pin cable from the motherboard's Reset header to JP7 on your MegaRAC
G3 card. Connect the chassis reset switch to JP8 on your MegaRAC G3 card.
Note:
JP7 and JP8 can be used in place of the MegaRAC Feature Cable to reset the
motherboard.
10
MegaRAC G3 User's Guide
Description
Ground
Reset #