American Megatrends MegaRAC G3 User Manual page 35
American megatrends megarac g3 controllers: user guide
Hide thumbs
Also See for MegaRAC G3:
- Brochure (4 pages) ,
- Quick install manual (2 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Step 8 Connect to the MegaRAC G3 from a Client System,
Step
Description
7
In this example, the MegaRAC G3 card's IP address is 192.168.0.36. Double left click on the IP address
to start managing the MegaRAC G3 card and write down its IP address. Left click on the Finish button
after RacTrendsSeek Locator discovers all MegaRAC cards.
8
When prompted for the user name and password, enter the following:
Left click the OK button. After you successfully log into your MegaRAC G3 card, you are greeted with
the Welcome to MegaRAC G3 screen.
Note:
The default user name and password are in lower-case characters.
Note:
When you log in using the root user name and password, you have full administrative
powers. It is advised that once you log in, you change the root password. See the
Administrator Setup subsection under the MegaRAC G3 Configurations section of this chapter.
Field
Default
root
User Name
superuser
Password
Continued
Chapter Two : Installing Your MegaRAC G3 Card
27
Advertisement
Table of Contents
