Remote Console - American Megatrends MegaRAC G3 User Manual

Remote Console

Remote Console is a subsection of the Manage group. The following table describes the
information listed in this subsection in detail:
Item
High Color Quality
(16-bit) for fast/LAN
Connection
Low Color Quality
(8-bit) for fast/LAN
Connection
Low Color Quality
(8-bit) for
slow/WAN/DSL
Connection
Note: The Low Color Quality (8-bit) for slow/WAN/DSL Connection mode is recommended for
low speed connections such as those over a Wide Area Network or home DSL. If you are
connecting over a LAN at high speeds you can use High Color Quality (16-bit) for
fast/LAN Connection mode. In order to change modes you must stop redirection, close
the browser, and reconnect in the appropriate mode.
Description
This option allows the MegaRAC G3 to send 16 bits per pixel color.
This setting is recommended for faster connection speeds or over a
LAN connection.
This option allows the MegaRAC G3 to send 8 bits per pixel color.
This setting is recommended for lower connection speeds or over a
WAN connection.
When using Low Color Quality (8-bit) for fast/LAN Connection, you
can opt not to use software compression. Compression can increase
the frame rates. Best used for slower connections.
This option allows the MegaRAC G3 to send 8 bits per pixel color.
This setting is recommended for lower connection speeds or over a
WAN connection.
When using Low Color Quality (8-bit) for slow/WAN/DSL
Connection, you can also use software compression. Compression
can increase the frame rates. Best used for slower connections, such
as DSL.
Chapter Four : Using Your MegaRAC G3 45