American Megatrends MegaRAC G3 User Manual page 131

MegaRAC G3 Card Remote Recovery Application (RRA),
Step Description
3 The Card Settings screen appears.
The Card Setting fields are explained in the table below:
Field/ Button
Select Card
Number
dropdown box
MAC Address
IP Address
Netmask
Gateway
Cancel Button
OK Button
Description
The MegaRAC G3 Remote Recovery Application (RRA) automatically assigns a
card number to the MegaRAC G3 card that it locates in Recovery Mode. This is
helpful when you are trying to flash more than one MegaRAC G3 card. Think of
the Select Card Number dropdown box as a shortcut to other MegaRAC G3 cards
that are in Recovery Mode.
This field allows you to specify the MegaRAC G3 card's MAC Address.
Note:
New settings are stored in the Windows registry automatically.
Note: When you specify the
MAC address back to the one indicated on the sticker physically located
on the back of the
This field allows you to specify your MegaRAC G3 card's IP address. The IP
address you assign is only valid during Recovery Mode.
This field allows you to specify your MegaRAC G3 card's network mask. The
network mask you assign is only valid during Recovery Mode.
This field allows you to specify your MegaRAC G3 card's gateway or router
address. The gateway address you assign is only valid during Recovery Mode.
The Cancel button allows you to cancel any new settings that are not saved.
The Ok button allows you to save any new settings that you have made and
continue with the flashing function.
Appendix C : MegaRAC G3 Remote Recovery Application (RRA) 123
Continued
MegaRAC G3
card, it is advisable to set the
MegaRAC G3
card's PCB.
Cont'd