Upgrade Firmware - American Megatrends MegaRAC G3 User Manual
American megatrends megarac g3 controllers: user guide
Hide thumbs
Also See for MegaRAC G3:
- Brochure (4 pages) ,
- Quick install manual (2 pages) ,
- Datasheet (2 pages)
Table of Contents
Advertisement
Upgrade Firmware
The Upgrade Firmware Wizard dialog box is a subsection of the Manage group. The
Upgrade Firmware Wizard will help you upgrade your MegaRAC G3's firmware.
DO NOT CLOSE THE WINDOW USING THE CLOSE BUTTON (X) ON THE TITLE
BAR WHEN THE MEGARAC G3 IS IN UPGRADE MODE. USE THE CANCEL
Note:
The firmware upgrade process is a crucial operation. Make sure that the chances of a
power or connectivity loss are minimal when performing this operation.
Note:
You can use the Cancel button at this time to abort the upgrade process. By doing so, the
MegaRAC G3 card resets itself (except in Step 1 of 4).
Note:
Once you enter into Flash Mode and choose to cancel the firmware flash operation, the
MegaRAC G3 must be reset. This means that you must close the Internet browser and log
back onto the MegaRAC G3 before you can perform any other types of operations.
Warning
BUTTON ONLY!
Chapter Four : Using Your MegaRAC G3
Cont'd
75
Advertisement
Table of Contents
