Advertisement
Available languages
Available languages
Manual Operations
This display panel on the indoor unit can be used to operate the unit in case the remote control has
been misplaced or is out of batteries.
Operation indicator
•
MANUAL button: This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
•
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The system will then
turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will
be disabled during this operation.
•
OFF mode: When the panel is turned OFF, the unit turns off and the remote control is re-enabled.
Page 8
Manual button
Timer indicator
PRE-DEF
(pre-heating/defrost)
indicator
LED display
Infrared receiver
Alarm indicator
Fig. 3.1
V.1
3
Advertisement
