Assembling The Barbecue - Beef Eater SIGNATURE Series Assembly And Operating Instructions Manual

ASSEMBLING THE BARBECUE

Check the Burners and remove the clips
The burners should already be filled to the barbecue.
There may be transportation clips though, that need to
be removed from the back of the burners before placing
the barbecue in the installation. (see diagram below)
Remove clip from every burner
• Fitting the burners
When the burners need to be refitted, position the
open end first, over the stem of the control valves at
the front of the barbecue.
12
ASSEMBLING THE BARBECUE
• Lower the other end of the burner so the lug
locates into the corresponding hole at the rear
of the barbecue.
Fitting the vaporizers
•
The vaporizers are designed to vaporize fats and juices
from your food. The Vaporizers reduce flare-ups and
help to add that great barbecue flavour.
To install the Vaporiser, remove cardboard packaging
material and place the Vaporizes into position.
(see diagram).
Fit 3 vaporizers for a 5 burner model or 2 vaporizers
for a 4 burner model. The vaporizes must be fitted to
the same side of the barbecue as the open grill.
They will not work if fitted under the solid plate.