Beef Eater signature plus Assembly And Operating Instructions Manual

Beef Eater signature plus Assembly And Operating Instructions Manual

Advertisement

Quick Links

Assembly and Operating Instructions
FOR OUTDOOR USE ONLY
SIGNATURE
SERIES
PLUS, S-3000E, S-3000S
BALCONY
AUSTRALIA / NEW ZEALAND

Advertisement

Table of Contents
loading

Summary of Contents for Beef Eater signature plus

  • Page 1 SIGNATURE Assembly and Operating Instructions SERIES PLUS, S-3000E, S-3000S BALCONY AUSTRALIA / NEW ZEALAND FOR OUTDOOR USE ONLY...
  • Page 2: Table Of Contents

    CONGRATULATIONS CONTENTS Dear customer, Important safety instructions ��������������������������������������������������������3 Gas cylinder safety ������������������������������������������������������������������������4 Congratulations and thank you for choosing our barbecue� Gas leak test procedure ����������������������������������������������������������������4 We are sure you will find it a pleasure to use� Before you use the barbecue, we recommend that you read through the Tools required ��������������������������������������������������������������������������������5 relevant sections of this manual, which provide a description Assembly instructions �������������������������������������������������������������������6...
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Please read the user manual carefully and store in a handy place for later reference� WARNING WARNING • Do not lean over barbecue when lighting. TIPS & INFORMATION IMPORTANT • Do not leave the barbecue unattended when alight. Important –...
  • Page 4: Gas Cylinder Safety

    GAS CYLINDER SAFETY GAS LEAK TEST PROCEDURE Gas Cylinder Safety Information Use the following procedure to check for gas leaks� Never use a naked flame to check for gas leaks� This appliance is designed to be used with a gas cylinder not FIG 1 exceeding 9KG (20lbs) capacity�...
  • Page 5: Tools Required

    TOOLS REQUIRED You will need the following tools to assemble your barbecue� IMPORTANT! 10mm Spanner (wrench) all body nuts Always check the gas label on the appliance to ensure that you have the correct gas configuration. FIG 5 19mm Spanner (wrench) for gas inlet connection For Your Safety Phillips Head Screwdriver If you smell gas:...
  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Assembly notes FIG 6 Before any assembly or installation is attempted it is important that you check for damage or missing parts� Your dealer or the manufacturer must be notified of any problems immediately before proceeding� The main frame of the barbecue has been factory assembled requiring only the following simple steps for completion�...
  • Page 7 ASSEMBLY INSTRUCTIONS Fitting the heat reflectors Fitting the vaporisers Completely remove all of the plastic film from the reflectors� Remove the protective plastic film from each vaporiser and The tabbed ends of the heat reflectors face forward to the then fit the vaporisers to the barbecue� The tabbed ends front of the barbecue frame�...
  • Page 8 ASSEMBLY INSTRUCTIONS Fitting the cooking plates and grills FIG 15 We recommend fitting the plate to the left-hand side of the barbecue frame (with the drain hole to the extreme left)� The grill or grills can be fitted to the right hand side of the barbecue frame�...
  • Page 9: Installation Instructions

    INSTALLATION INSTRUCTIONS Recommended minimum LPG cylinder capacity for use with IMPORTANT this appliance is 4kg� Maximum LPG cylinder capacity for use with this appliance is 10kg� This appliance must be installed in accordance with the installation requirements of the LOCAL GAS and ELECTRICITY Do not install the gas cylinder beneath the barbecue unless supply authority, or the appropriate installation code issued in conjunction with an approved separator panel�...
  • Page 10: Assembly And Gas Connection Instructions For Side Burner

    ASSEMBLY AND GAS CONNECTION INSTRUCTIONS FOR SIDE BURNER Converting the unit to natural gas 13� For mobile units attach restraining tether to anchor point on barbecue, and fasten within 50mm of fixed gas 1� Turn off the gas supply valve on the gas cylinder� Ensure outlet with suitable fastener�...
  • Page 11: Assembly Instructions For Trolley

    ASSEMBLY INSTRUCTIONS FOR TROLLEY Before You Start 2) Fit The Rotating Castors Note the tools you will need before you begin� Fit the rotating castors into the holes in the bottom of the base� Again, use only two Allen head screws, washers and Check for damaged or missing parts, and consult your nuts for each castor in the positions shown�...
  • Page 12 ASSEMBLY INSTRUCTIONS FOR TROLLEY 4) Fit The Magnets To The Cross Brace 6) Fit The Lower Back Panel Hold the cross brace so the folded tabs are facing towards Both back panels are identical� you� Push the magnets into place so the magnetic side is Screw one of the back panels to the base and side panels facing you�...
  • Page 13 ASSEMBLY INSTRUCTIONS FOR TROLLEY 8) Fit The Towel Rack 10) Fit The Top Enclosure Panel If you purchased the optional towel rack, you can attach it to The front of the enclosure panel sits neatly on the front either the right or left side panel� cross brace�...
  • Page 14 ASSEMBLY INSTRUCTIONS FOR TROLLEY 12) Fit The Doors 14) Fit The Storage Racks Support the door rod from underneath, slip the top of the If you purchased any optional storage racks, they slide easily rod into the hole in the cross brace, and allow the bottom of into the holes on the right or left side panel�...
  • Page 15 ASSEMBLY INSTRUCTIONS FOR TROLLEY 16) Fit The Cylinder Bracket 18) Lower The Barbecue Into The Cart This slips into the slot on the right side panel, on either the You will need to tease the side panels apart slightly to be inside or the outside of the cart�...
  • Page 16 ASSEMBLY INSTRUCTIONS FOR TROLLEY Connection to Barbecue GAS AUTHORITY FOR CONFIRMATION OF GAS NATURAL Ensure all gas controls on the barbecue and side burner are set to OFF� Take the connector hose that came with the side burner� GAS AUTHORITY FOR CONFIRMATION OF GAS Connect one end to the inlet of the barbecue�...
  • Page 17 ASSEMBLY INSTRUCTIONS FOR TROLLEY Replace The Drip Plate 21) Fit The Dress Fascia To The Drip Tray Push the rear drip plate tabs back into the slots at the back Screw the dress fascia to the drip tray using the small of the side burner body, and secure the front of the drip plate Phillips head screws, washers and nuts packed with the with the screw removed earlier�...
  • Page 18: Operating Instructions

    OPERATING INSTRUCTIONS Before lighting 1� Push the knob in and slowly turn it counter clockwise towards the high position until your hear a click� The 1� Check that all gas hose fittings and connections are burner should ignite� spanner tight� Gas regulators that are fitted with a hand 2�...
  • Page 19 OPERATING INSTRUCTIONS Flame Failure - Auto Shut Off Safety System Manual lighting Operating Instructions 1� Press and turn the left hand control knob counterclockwise to the “High” position, then light the For added gas safety, each burner of your BeefEater left hand burner immediately through the gap between Signature barbecue is fitted with Flame Failure Technology�...
  • Page 20 OPERATING INSTRUCTIONS Installation warnings Operating your BeefEater barbecue Lighting Direct cooking method NOTE: Always open the roasting hood before lighting the barbecue� Commonly used for traditional barbecuing� Place food over Light the outside burners, ie: one burner at each end of the lit grill section�...
  • Page 21 OPERATING INSTRUCTIONS Operation of the optional side burner WARNING WARNING Lighting When using the side burner ensure that any handle fitted to a wok, pot or pan is positioned so that it is out of reach 1� Check the control knob is in the Off position and ensure of children.
  • Page 22: Hood Assembly Instructions

    HOOD ASSEMBLY INSTRUCTIONS Attach the hood top to the hood base (if required) Preheating Guide The screws go in from the outside, a washer and nut is used 2, 3, 4 and 5 burner barbecue Turn on desired number of on the inside�...
  • Page 23: Getting The Most From Your Roasting Hood

    GETTING THE MOST FROM YOUR ROASTING HOOD Lifting and moving your hood WARNING WARNING The BeefEater roasting hood has been engineered for Do not exceed the temperature warning on the temperature balance as well as durability� To lift the hood, place your gauge.
  • Page 24 GETTING THE MOST FROM YOUR ROASTING HOOD You may find it useful to purchase a meat thermometer Maintain the right cooking temperature to help take the guess work out of cooking� These two charts tell you how hot and how long to cook various Meats such as beef, lamb, veal and pork should be types of meat, and the approximate burner settings to help you about 70˚C/160˚F when medium�...
  • Page 25: Help Guide

    HELP GUIDE Your BeefEater barbecue has undergone a series of quality checking points prior to leaving the factory� Should you have a problem with your appliance please refer to the help guide below before calling your dealer or service person� IMPORTANT Shut off gas supply before performing any checks.
  • Page 26 HELP GUIDE How long will the gas in my cylinder last? If you have a full cylinder of propane, just look at the table below to see how many hours of gas you have, depending on how many burners you have alight� These figures are approximate only�...
  • Page 27: Care And Maintenance

    CARE AND MAINTENANCE Cooking surface preparation Cleaning the cooking surfaces Each system has specific care, cleaning and maintenance Before using your BeefEater barbecue requirements so it is important to read the correct instructions for the system supplied with your barbecue� Your BeefEater barbecue will feature either of the following cooking surfaces�...
  • Page 28 CARE AND MAINTENANCE RF Technology - porcelain enamel coated grills General care and maintenance instructions Many food acids, marinades, juices and sauces contain 1� Replace aluminium foil or absorbent material in drip highly acidic elements that will slowly attack the surface of tray at regular intervals to prevent grease build-up, the cast iron if not removed immediately after cooking�...
  • Page 29 CARE AND MAINTENANCE Stainless steel cleaning and maintenance Rust Clean the appliance as required or at least twice annually Cast iron and steel are metals and will rust if you do not with hot soapy water� Avoid abrasive cleaners or brushes provide sufficient maintenance and care�...
  • Page 30 CARE AND MAINTENANCE Service and maintenance This appliance should be checked and serviced by an authorised service person every 2 years to ensure the appliance remains in a safe operation condition� These services are not covered by warranty� SERVICE AND MAINTENANCE FREQUENCY BY AUTHORISED EACH USE...
  • Page 31: Locating Your Barbecue And Side Burner

    LOCATING YOUR BARBECUE AND SIDE BURNER Most importantly, this is an outdoor appliance. Ensure it is Protection From Weather: Keep the side burner protected positioned safely away from anything that can catch fire. from adverse weather, including rain and high winds. Polyvinyl covers are available that have been specially designed for this range of barbecues.
  • Page 32: Outdoor Installation Instructions

    OUTDOOR INSTALLATION INSTRUCTIONS WARNING WARNING WARNING WARNING Contact your local municipality for any building codes When using an LPG/Propane supply system in an enclosure, regulating the installation of outdoor barbecue appliances. ventilation must be provided. Gas vapour is highly explosive Outdoor installations must conform to local codes or, in the and can cause serious bodily injury or damage to property if absence of local codes, with the following.
  • Page 33: Specifications

    SPECIFICATIONS MODEL DIMENSIONS (BUILT-IN) AGA APPROVAL 3986 Model A mm B mm C mm Wt� kg Signature S3000S 3B 37�0 Signature S3000S 4B 45�5 Signature S3000S 5B 53�0 Signature S3000E 3B 37�0 Signature S3000E 4B 45�5 Signature S3000E 5B 53�0 Balcony 2B 30�0 SIGNATURE S3000 SERIES AND BALCONY...
  • Page 34: Notes

    NOTES NOTES...
  • Page 35: Warranty

    Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: BEEFEATER SIGNATURE BARBECUE 7. You may not make a claim under this warranty unless the defect claimed is This document sets out the terms and conditions of the product due to faulty or defective parts or workmanship. Electrolux is not liable in the warranties for Electrolux Appliances.
  • Page 36 For more information on all Beefeater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: AUSTRALIA phone: 1300 307 939 fax: 1800 356 669 email: customercare@electrolux.com.au web: beefeaterbbq.com NEW ZEALAND phone: 0800 436 245...

This manual is also suitable for:

Signature s-3000eSignature s-3000s

Table of Contents