Beef Eater SIGNATURE Series Assembly And Operating Instructions Manual page 9

NATURAL GAS INSTALLATION
5. Connecting the appliance to a natural gas supply
• The appliance shall be installed in accordance to AS/
NZS5601 gas installations and any relevant local gas
fitting rules.
• Remove the fitted LPG gas bottle hose and
regulator from the adaptor mounted to the
semi-rigid appliance pipe
• Connect the conversion kit hoses and natural gas
regulator. Ensure the flow arrow on the regulator points
towards the appliance
• Carry out a leakage check on all connections
4. Adjust the turndown setting on the valve
NOTE: The final step in the conversion of the barbecue to
natural gas is the adjustment of the turndown setting.
• Light each burner and rotate the control knob to the
lowest setting, then remove the knob from the valve
shaft.
• Using a small flat-blade screwdriver adjust the
turndown adjustment screw to achieve a small steady
flame on the burner.
View with
knob removed
• Replace the knob.
• Recheck the operation of the burner
at the maximum and turndown.
• Repeat procedures for all valves.
Turndown screw
NATURAL GAS INSTALLATION
9