How To Process [Seal Only] Mail - quadient IN-360 User Manual

2. Check or change the type of impression, if you are not in [Seal Only] mode.
Press
3
To change the type of impression, select the Type line, press [OK] and then select
[No printing] in the Type of impression screen and press [OK].
3.
Press
You are now ready to process mail.
Processing [Seal Only] Mail
To run mail, follow the procedure below after you have completed the steps in
[Seal Only] Mail

How to Process [Seal Only] Mail

1.
Press
58
to access the Build Impression screen:
To select an option in the screen:
- Highlight the option using the arrow keys
- Then press
or to return to the home screen.
on page 57.
. System motors start running.
to validate your selection.
and
How to Set