How To Process Mail In [Date Correction] Mode - quadient IN-360 User Manual

Processing Mail in [Date Correction] Mode
To run mail, follow the procedure below after you have completed the steps in
Correction] Mode
3

How to Process Mail in [Date Correction] Mode

To print the new date impression:
1.
Press
2. Insert the envelope (or a label) into the mail path against the rear-guide wall, side to
be printed facing upwards.
The Mailing System applies the impression and the mail piece (or label) is sent to the
catch tray.
46
on page 44.
Before printing, turn the envelope to print on a free area.
. The system motors start running.
If mail piece is bigger than mail path maximum thickness (see
Specifications on page 207), you may use a label tape.
Setting [Date
Mail