Table of Contents
Advertisement
If you want to unlock a CalSet to change the Calibration Method, view the CAL Screen and touch the
SLOPE field of the desired CalSet. Do not change the slope, but simply press ENTER when the
numeric touch pad appears. Now the CalSet should be highlighted, indicating that the Calibration
Method is unlocked.
3.6
Modifications to Main Screen
Limited modifications can be made to items on the Main Screen. You will need to log in with an appropriate
password before changes are allowed. The items you may change are the Product ID and the density units.
3.6.1
The Product ID may help to identify the product being measured. It is visible whenever the Main
Screen is displayed and also included in the header for the transmission of the serial data when
analysis is started. To enter the Product ID, tap the Product ID field on the Main Screen and enter up
to 8 alphanumeric characters including spaces. Access is allowed for Operator2 (Level 2) or higher
password.
M o d e l 6 8 2 T - H P U S E R M A N U A L A T E X Z o n e 2
Product ID
Chapter 3: Operation, Page 25
Advertisement
Table of Contents
