Log - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
8.

Log

Alarm status
Active (red)
Rectified (green)
Accepted (orange)
The log lists all activities in chronological order. This creates a complete log, which is necessary for
monitoring after malfunctions. The log contains several messages.
Alarm status change
• Active.
• Accepted.
• Recovered.
Alarm types
• Input 1-8
• Power failure.
• Internal malfunctions.
• Multiple alarms.
Alarm message
The alarm message tells you which interface
attempted to reach which contact and at what time.
The interfaces you may find in the log are:
• PSTN
• GSM
• SMS
• VoIP
• Pager
• Email
Call list failed
If an alarm procedure has been run the maximum
number of attempts without acceptance, the call out
to the relevant call list has failed and the Octalarm-
Touch will repeat the alarm after the set waiting
time, as outlined in chapter "6.1.1. Alarm settings (left
side)".
Manual Octalarm-Touch | Back to index
Notifications
Alarm message
Repeat message
Call list message
Date | time
notification
Page 25