Paging; Web Portal - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
Ethernet settings
Ethernet settings
Advanced
Enabled

7.4.7. Paging

Pager is an old technique, available in three variants:
• Tone-only
• Numeric messages
• Text messages
The Octalarm-Touch supports the text message variant by means of a SOAP link. This SOAP link works
by sending messages to the pager via the Internet. The paging function will not work without an internet
connection.
Paging is only supported in the Netherlands. For paging in the Netherlands, you must activate Internet
paging on the KPN portal. For more information about login details for this portal, please contact KPN's
paging service department: semafonie@kpn.com.
Enabling/disabling paging
• Go to 'Settings'.
• In navigation, scroll to 'Pager'.
• Press 'Change'.
• Check or uncheck 'Component enabled'.
• Press 'Save'.

7.4.8. Web portal

The web portal is enabled by default, allowing you to use the 'Adesys Alarm' app, set up the system
remotely and receive software updates. We strongly recommend that you leave the web portal enabled.
If the web portal is disabled, we cannot guarantee that you have up-to-date software, and the device
functions may be restricted as a result.
In addition, it will not be possible to use the Octalarm Connect SIP/VoIP connection and the Octalarm
Connect SMTP/Email link.
Enebling/Disabling web portal
• Go to 'Settings'.
• In navigation, scroll to 'Web portal'.
• Press 'Change'.
• Check or uncheck 'Component enabled'.
• Press 'Save'.
Manual Octalarm-Touch | Back to
IP-address
Gateway
DNS1
DNS2
Duplex speed
index
Auto Negotiation|
Half Duplex 10Mbps | Full Duplex 10Mbps |
Half Duplex 100Mbps | Full Duplex 100Mbps |
Full Duplex 1000Mbps |*
* delete as appropriate
/
Page 24