Adesys B.V. | Wateringen
7.4.4. VoIP
Voice-over IP is a way to make a call via the Internet. The Octalarm-Touch uses the SIP protocol for this.
To use the 24/7 monitored Adésys servers, you must activate Octalarm Connect via the included SIM card.
For more information on this, see chapter "7.1.2. Octalarm Connect". When using Octalarm Connect, the
SIP server for VoIP is set to 'Octalarm Portal' by default.
Using your own SIP server
If you do not plan to use your own SIP server, you can skip this section.
To use your own SIP server, complete the following
steps:
• Go to 'Settings'.
• In navigation, scroll to 'VoIP'.
• Set the data by pressing 'Modify' and selecting
'Own VoIP server'.
These settings depend on your provider. For this information, please
refer to your system administrator and/or provider. You can use the
following form for this.
• Press 'Save'
VoIP settings
VoIP
Account
Advanced
RTP
NAT (Network Address
Translation)
Network
Reset to Adésys SIP server
To use Adésys SIP servers, please follow these steps:
• Go to 'Settings'.
• In navigation, scroll to 'VoIP'.
• Configure your preferred settings by pressing 'change' and selecting 'Octalarm Portal' under SIP server;
• Press 'Save'
Manual Octalarm-Touch | Back to
Component
Domain
User name
SIP address
Password
Caller ID
Start port sequence
End port sequence
RTP transport encryption
Signal encryption
ICE
STUN
STUN server (URL)
TURN
User name
Password
Transport TCP | TLS | UDP*
Port
Proxy
Proxy server
Transport protocol TCP | TLS | UDP*
index
enabled | disabled*
* delete as appropriate We strongly recommend leaving the com-
ponent enabled to ensure redundancy.
sip:
sip:
disabled | optional | mandatory*
* delete as appropriate
disabled | TLS mandatory*
* delete as appropriate
enabled | disabled*
* delete as appropriate
enabled | disabled*
* delete as appropriate If enabled, Press 'Add' and note down STUN
server URL:
enabled | disabled*
* delete as appropriate If enabled, press 'Add' and note down TURN
server details:
URL
* delete as appropriate
enabled | disabled*
* delete as appropriate If enabled, Press 'Add' and note down Proxy
server URL:
* delete as appropriate
Page 22
Need help?
Do you have a question about the Octalarm-Touch and is the answer not in the manual?
Questions and answers