Changing Settings - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
Types of messages on the dashboard:
1. Alarm message
Timetable type
day
night
weekend
Input number
and name
When you press on this message, there are two options:
• Buzzer off only:
the buzzer will be muted. When the Octalarm-
Touch does not record any activity for 10
minutes, the buzzer will turn on again.
• Accept all alarms:
If you accept all alarms, the Octalarm-Touch
will not initiate a new alert for this alarm, until
the waiting time between repeats has expired.
More information about the waiting time can be
found in chapter "6.1. Configuring inputs".
2. Update availabe
• Press on this message to go to update menu.
• Run the new update.
The update process takes a few seconds, after which the system is restarted.
4.3.

Changing settings

Contacts with 'Administrator' or 'Installer' permissions can make changes using the 'Change' button in the
'Contacts', 'Alarms' and 'Settings' menus. These buttons are not visible for contacts with 'User' permissions.
Adjusting settings
• On the relevant screen, press 'Change' (on the right, at the top or bottom of a scroll
list).
• Change the settings as desired.
• Press 'Save' (on the top right or at the bottom for changing a call list).
After pressing the 'Save' button, the changed settings are in use.
Manual Octalarm-Touch | Back to
Date of occurance of alarm
Action
Busy calling...
Accepted
Waiting for...
index
Linked call list
Repeat
Number of repetitions /
/ Maximum number of repetitions
Page 10