Email; Ethernet - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen

7.4.5. Email

When using Octalarm Portal, Email is set to Octalarm Portal by default. For this purpose, the system uses
the mobile Internet and the Ethernet connection.
Using your own SMTP server
If you do not plan to use your own SMTP server, you can skip this section.
To use your own SMTP server, complete the
following steps:
• Go to 'Settings'.
• In navigation, scroll to 'Email'.
• Set the data by pressing 'Change' and selecting
'Own SMTP server'.
These settings depend on your provider. For this information, please
refer to your system administrator and/or provider. You can use the
following form for this.
• Press 'Save'
Email settings
Email
SMTP settings
Reset to Adésys SMTP server
To use Adésys SMTP servers, please follow these steps:
• Go to 'Settings'.
• In navigation, scroll to 'Email'.
• configure your preferred settings by pressing 'change' and selecting 'Octalarm Portal' under SMTP
server;
• Press 'Save'

7.4.6. Ethernet

Ethernet is set to DHCP by default. If an Ethernet cable is connected, an IP address is automatically
assigned to the Octalarm-Touch.
Using a static IP
If you do not plan to set a static IP address, you can skip this section.
To use a static IP address, you can set DHCP to manual in the 'Ethernet' screen. If you then enter an IP
address, the Octalarm-Touch will only use that IP address. If this does not allow the Octalarm-Touch to
connect correctly, it is important to check this IP address, or you may have to use DHCP.
To set a static IP address, complete the following
steps:
• Go to 'Settings'.
• In navigation, scroll to 'Ethernet'.
• Press 'Change'.
• Set DHCP to 'Manual' and enter the data.
These settings depend on your provider. For this information, please
refer to your system administrator and/or provider. You can use the
following form for this.
• Press 'Save'
Manual Octalarm-Touch | Back to
Component
SMTP server
SMTP server address
SSL
SMTP port
Authentication
User name
Password
index
enabled | disabled*
* delete as appropriate We strongly recommend leaving the com-
ponent enabled to ensure redundancy.
Own SMTP server
enabled | disabled*
* delete as appropriate
enabled | disabled*
* delete as appropriate
Page 23