Multiple Alarms (At Once); Call Interface Rotation - Adesys Octalarm-Touch Manual

Adesys B.V. | Wateringen
External IO (EM-8001)
In case of an external IO malfunction, the EM-8001 (external module) is unreachable. Possible causes
include a wrong slave ID (notification: 'External IO multiple modules with same ID'), loss of power to the
module (notification: 'External IO communication error') or too much noise on the bus.
Battery failure
This failure occurs when the battery is removed or defective. Check the battery connection by
disconnecting and reconnecting the battery.

6.2.3. Multiple alarms (at once)

When 5 or more alarms are active at the same time, the Octalarm-Touch will report them as a single
alarm. You will receive the notification: 'Multiple alarms. There are more than 5 alarms'. Reporting multiple
alarms in 1 notification helps maintain clarity and ensures that all alarms can be handled properly.
6.3.

Call interface rotation

Manual Octalarm-Touch | Back to
The Octalarm-Touch automatically rotates its interfaces when sending out
alarms. This allows the system to check if all interaces are still working.
For example: After starting, when there is an alarm, the system starts dialling
out via GSM. After this call has been made, the system automatically changes
the order and for the next alarm the system will use another communication
interface.
index Page 15