5.4 Configuration menu
5.4.1 Information
About information
The available information items for your display are:
•
Model (commercial type identification)
•
Operating Hours (unit operation hours)
•
Main board release (hardware and firmware identification)
•
MNA release (firmware identification)
•
Eth1 Main (IP address of Main ethernet (1) port of the monitor)
•
Eth2 2nd (IP address of 2nd ethernet (2) port of the monitor)
•
Keyboard release (hardware and firmware identification)
•
SDI module release (hardware and firmware identification)
•
Serial Number (unit serial number)
•
Main FPGA release (firmware identification)
To access information
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration menu.
3.
Enter the Information submenu.
The different information items are shown.
5.4.2 Language
About languages
The available languages for your display OSD menu are:
•
English
•
Français
•
Deutsch
•
Español
•
Italiano
To select the language
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration menu.
3.
Enter the Language submenu.
4.
Select one of the available languages and confirm.
5.4.3 Source shortkey (Main source selection)
About the source shortkey
By default, the Source shortkey ( ) allows to scroll through all the possible input sources and quickly select
the main source, without the need to navigate through the OSD menu. This shortkey function can be disabled
however to avoid unwanted or accidental switching of the main input source.
To enable/disable the source shortkey
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration menu.
Advanced operation
K5902094 (451920611693) /02
MDSC-8232
37