Barco MDSC-8232 User Manual page 60

Important information
White point
Gamma
Backlight sensor
Front sensor
Housing color
Screen protection
Keyboard
Video input signals
Video output signals
Video formats
Multi-image support
Remote control
Power source requirements for
external power supply (nominal)
Power source requirements for
display power input
Power supply DC output cable
length
Power consumption
Cooling
Power management
OSD languages
Dimensions display (W x H x D) 777 x 472 x 117 mm (30.6 x 18.6 x 4.6 in)
Dimensions power supply (W x
H x D)
Dimensions packaged (W x H x
D)
Net weight display
Net weight power supply
Net weight packaged
Mounting standard
Recommended modalities
Certifications
60 K5902094 (451920611693) /02
Native: Min 4900K, Typical 6500K, Max 9200K
Calibrated: 5600K, 6500K, 7600K, 9300K
Native, 1.8, 2.2, 2.4, DICOM, Video
Backlight stabilization
N/A
RAL 9004
Anti-reflective tempered glass
Capacitive touch keyboard (with enable/disable switch)
1 x 4K-UHD input: 2x DP 1.1 (at 1920x2160 or 2048x2160) genlocked or 1x
DP 1.2 MST or 2x 10Gb Ethernet fiber optic
1 x DVI FHD input (upscaled to UHD)
1 x 3G-SDI FHD input (upscaled to UHD)
1 x 3G-SDI loopthrough
1 x DVI FHD output (4K is down-scaled to FHD)
Display Port 1.2 MST (10 bit) up to 4096x2160 @60Hz (displayed at native
resolution)
Dual stream DP 1.1 (10-bit) up to 2048x2160 x2 @60Hz synchronized
(displayed at native resolution)
3G-SDI (10-bit), in compliance with: SMPTE 425M (Level A), SMPTE 424M,
SMPTE 292M, SMPTE 259M, SMPTE 296M, ITU-R BT.656, ITU-R BT.601
DVI (8bit) up to 1920x1080 @60Hz
No
FW download & control protocol via optical Ethernet intferface
100-240 VAC, 50/60 Hz auto-switch
+24 VDC ±10% / 9.5 A
2.0 m (6.6 ft)
150 W (typical), 230 W (max)
Thermo regulated forced cooling
Low power modes:
Stand-by: about 52 W
Power-off: about 1 W
English, French, German, Spanish, Italian
223 x 88.5 x 38.6 mm (8.8 x 3.5 x 1.5 in)
730 x 560 x 170 mm (28.74 x 22.05 x 6.69 in)
15.5 kg (34.1 lbs)
1.2 kg (2.65 lbs)
21.7 kg (47.9 lbs)
VESA (100 x 100 mm, 200 x 100 mm)
Endoscopy, Laparoscopy
• IEC 60601-1: 2012 Edition 3.1 (Medical electrical equipment – Part 1:
General requirements for basic safety and essential performance)
• EN 60601-1: 2006 +A1:2013 (Medical electrical equipment". Part 1:
General requirements basic safety and essential performance)
• ANSI/AAMI ES 60601-1: 2005/(R)2012 and A1:2012, C1:2009/(R)2012
and A2:2010/(R)2012 - Med. El. Equip., Part 1: general req. for basic safety
and essential performance.
• CAN/CSA-C22.2 No. 60601-1: 14 Medical Electrical Equipment - Part 1:
General Requirements for Basic Safety and Essential Performance
(Harmonized with Ed. 3.1)
MDSC-8232