Read Motor(Mr-3012) - Toshiba MR-3011 Service Manual

12.4.3 Read motor (MR-3012)
[A] Disassembly
(1) Disconnect 2 connectors and remove 2 binding
bands, from read motor bracket.
(2) Remove 4 screws and take off the read motor with
the bracket attached.
(3) Detach 2 springs at the back of the bracket.
Remove 2 screws
(4) Remove 2 screws
apart from the motor plate.
[B] Assembly and adjustment
(5) Attach the read motor to the motor plate with 2
screws .
(6) Attach the motor plate to the bracket and fix it with
2 screws temporarily.
(7) Hook on 2 springs.
(8) Put the timing belt on the pulley of the main unit
and gear of the motor shaft.
Attach the bracket with the read motor on the rear
frame with 4 screws.
October 2000 © TOSHIBA TEC
and take off the bracket.
and take the read motor
Binding band
2
1
12-7
Connector
Binding band
Connector
1
Moter Plate
Bracket
2
Spring
MR-3011/3012 DISASSEMBLY