Table of Contents
Advertisement
12.3 Reverse Solenoid
(1) Open the RADF. Remove one screw at the lower
part of the front cover.
(2) Release 5 latches. Slide the front cover horizon-
tally and remove it.
(3) Open the platen unit. Disconnect one connector
and remove 2 screws. Take off the reverse
solenoid.
October 2000 © TOSHIBA TEC
12-3
Front cover
Latches
Horizontaly
Platen unit
Connector
MR-3011/3012 DISASSEMBLY
- Quick Links:
- Specification
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
