Toshiba MR-3011 Service Manual page 36

(16) Start of transportation of next original Completion of transportation
The read motor starts to rotate forward and rotates the read roller and exit roller to start the transportation of the
next original to the pre-scanning position.
The read motor rotates for a certain number of pulses and stops after the read sensor has been turned ON. (The
leading edge of the next original reaches the pre-scanning position.)
(17) Start of scanning operation for next original
A transport signal is sent from the main unit and the read motor starts to rotate forward. The read roller and exit
roller is rotated to start scanning the next original.
(18) Completion of scanning operation for next original
Scanning is completed when the trailing edge of the next original has passed the scanning position.
October 2000 © TOSHIBA TEC 5-19 MR-3011/3012 DESCRIPTION OF OPERATION