Toshiba MR-3011 Service Manual page 32

(4) Start of transport operation Original length sensor OFF
The read motor starts to rotate forward and rotates the read roller and exit roller to start transportation of the
original paused at the scanning position. (The original is transported to determine its lengthwise size along the
feeding direction.)
(5) Original length sensor OFF Completion of downswing operation of pickup roller
The pickup roller is lowered after the feed motor has started to rotate forward and has rotated for a certain
number of pulses. (The pickup roller waits for the next pre-feeding operation in the lowered position.)
(6) Completion of downswing operation of pickup roller Pre-reverse position for mixed sized original
The read motor rotates for a certain number of pulse and stops after the original length sensor has been turned
OFF. (The trailing edge of the original reaches the pre-reverse position.)
October 2000 © TOSHIBA TEC 5-15 MR-3011/3012 DESCRIPTION OF OPERATION