If customer service is required
Should you require our Service, please advise us of
the catalog and serial number of your instrument.
You will find the pertinent information at the specifi-
cations, near the socket for the mains cable.
Moreover, it is helpful for our service representative
to know the software version
software version as follows:
1. Switch the instrument off
2. Switch the instrument on
For about 1 sec all displays read
You can determine the
.
Subsequently, the following readings will be dis-
played for 2 seconds each:
Software version key panel
Software version
NV-RAM version 1
NV-RAM-version 2
The values in the time display show the actual ver-
sion.
The last information displayed is the current cycle
status.
Cycle counter
The values given are only examples!
During the subsequent program test, the message
_ TEST PRO 9 ... 0 is displayed
Troubleshooting
77