SaMASZ SAMBA 160 Operator's Manual page 44

APPENDIX. Defining the total weight, axis load, tyre load capacity and minimum load
CAUTION:
When mounting the machine on a tractor using front and/or rear 3-point linkage,
a maximum value of permissible load cannot be exceeded – tractor's front axis
load must be 20% of the tractor's overall weight.
Before using the tractor-machine assembly, check whether these conditions are
met, while calculating and weighing the assembly.
M
P
For calculations the following data is necessary:
T [kg] Tractor's overall weight
T [kg] Front axis load on unloaded tractor
P
T [kg] Rear axis load on unloaded tractor
T
Total weight of machine mounted on front 3-point linkage or weight of front
M [kg]
P
ballast
Total weight of machine mounted on rear 3-point linkage or weight of rear
M [kg]
T
ballast
Distance between tractor's front axis centre and centre of gravity of
A [m]
machine mounted on front 3-point linkage / front ballast
B [m] Distance between tractor's axes
Distance between tractor's rear axis centre and centres of ball joints on
C [m]
tractor's lower links
Distance between centres of ball joints on tractor's lower links and centre
D [m]
of gravity of machine mounted on rear 3-point linkage / rear ballast
1
Refer to tractor's operation manual
2
Refer to technical data for machine in operation manual or price list
3
Dimensions / measurement
44
SAMBA
T
P
B
A
REAR DISC MOWER
M
T T
T
D
C
OPERATOR'S MANUAL
1
3
1 3
1
3
2 3
2 3
2 3
1 3
3
1
2