OPERATOR'S MANUAL
REAR DISC MOWERS
Transport should be done by qualified and specifically trained personnel,
❑
Grab the mower by any lifting devices only in places indicated by hook sign (Fig. 4),
❑
For mower lifting, use only lifting devices with hoisting capacity larger than mower's weight shown
❑
in data plate. This also applies to ropes and chains used for lifting,
Do not lift if transport belts, belt suspensions, ropes are damaged. Whenever damage to these
❑
parts occurs, replace with new ones,
When mounting slings, chains, handles etc., always set the machine's center of gravity properly,
❑
To safely support the machine, use ropes of adequate length so that the angle between them is no
❑
greater than 120°, and the angle between the strand and the vertical is no greater than 60°,
Lift the machine with the utmost caution and move it slowly,
❑
No one should be within the range of action of the lifting equipment when any transporting
❑
operations are being carried out,
Collapsible parts should be blocked in transport position,
❑
When the mower is on the vehicle's trailer, the machine should be secured against moving.
❑
NOTICE:
Securing both the danger area and activity performed shall lie under the responsibility
of the person in charge of the mower transporting.
SAMBA
Fig. 4. Transport holders
13