SaMASZ SAMBA 160 Operator's Manual page 32

SAMBA REAR DISC MOWER OPERATOR'S MANUAL
Fig. 20. Rear guard lifted up for replacement of cutting knives
Fig. 21. Quick replacement of cutting knives
130 Nm
Fig. 22. Knife mounting torqueing
NOTICE:
Before you change the knife check disc turns (Fig. 23).
NOTICE:
Due to high discs rpm speed, change knife holders in sets of the same weight.
Improperly changed knife holders will damage disc bearings.
NOTICE:
Different mounting of the knives will block the mower. When mounting pay particular
attention to loose rotation of the knife on the knife mounting pin.
32