Nbp Setup - Dräger Infinity Delta Series Supplement Manual

Supplement for Infinity Delta Series Software

NBP Setup

NOTE
The accuracy of the oscillometric blood pressure signal can decrease (up to loss of measurement)
under the following conditions:
– Weak pulses
– Irregular pulses
– Patient movement artifacts
– Tremor artifacts
– Respiratory artifacts
– Pulses generated from a ventricular assist
device
These conditions may prevent the monitor from performing a measurement within the maximum
allowable measurement time.
To connect the hose
 Push the hose end fitted with the plastic collar firmly into the connector on the left side of the monitor
(see figure below).
NBP hose connector
Delta/Delta XL
Venous Stasis
Available in software levels equal to or greater than VF9.1, and supports venous stasis in adult mode only
(with adult-based inflation pressures).
28
NBP hose connector
Kappa
Supplement – Infinity ® Delta Series Software VF10.1