Maintenance - AS MOTOR Ride-on-Allmaher AS 900 ENDURO Operator's Manual

Hide thumbs Also See for Ride-on-Allmaher AS 900 ENDURO:
Table of Contents

Advertisement

Maintenance

Warning
Risk of injury due to unexpected movement.
When inspections are carried out, the
device can move unexpectedly.
► Make sure that no persons or objects are
in the danger area of the blade.
► Make sure that no further hazards result
from an unexpected movement.
Warning
Risk of injury during maintenance and
cleaning work when the engine is running.
► Perform maintenance tasks only then
with a running engine if this is required in
the Maintenance table.
Prior to all maintenance and cleaning work
when the engine is not running:
1.
Let the device cool down for at least
20 minutes.
2.
Close the fuel valve and the tank ventila-
tion.
3.
Disconnect the negative pole of the bat-
tery.
Beware! For repair and maintenance work, lift
the device only by its frame.
Fig. 10:
You can use the spots marked with arrows at
the front of the towing lug and the frame below
the seat as suspension points.
Improper maintenance can make the device
unsafe for operation and result in accidents.
Regular maintenance keeps your device ready
for use.
Service the device according to the following
maintenance instructions.
Contact an authorised service centre if prob-
lems during maintenance occur or if you de-
termine deficiencies during one of the following
inspections.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents