AS MOTOR Ride-on-Allmaher AS 900 ENDURO Operator's Manual page 38

2
3
Fig. 24:
4. Insert the screw (3) from the bottom
through the crossbar.
5. Screw down the seat stop (2) with the
screw (3).
6. Press the lever (1) towards the outside
and push the seat forward.
7. Connect the seat contact switch by con-
necting the plugs at the seat and the
frame.
8. Press the lever (1) towards the outside
and move the seat to the desired position.
38
1
Putting up the folding bar
Fig. 25:
1. Unscrew the clamping levers on both sides.
2. Fold up the bar until it engages.
3. Tighten the clamping levers on both sides
to lock the bar.
Connecting the battery
Caution
When the battery is connected, there is a
risk of short circuit.
► Do not put tools or metal objects onto the
battery. Observe the assembly order
when connecting and disconnecting the
battery.
1. Connect the red cable (+) to the battery.
2. Connect the black cable (-) to the battery.