AS MOTOR Ride-on-Allmaher AS 900 ENDURO Operator's Manual page 44

Uneven cut, lawn be-
comes unsightly
Mulching result with
high plant material
not satisfactory
Mulching result with
low plant material not
satisfactory
Housing is jammed
The device does not
stop when the brake
is actuated
The engine does not
switch off
The tires become flat Thorns or sharp objects dam-
44
Blade is dull or worn.
Speed is too high proportion-
ately to the cutting height.
Housing of the mower is heavily
contaminated.
Different tire pressure.
Mower housing is not parallel to
the ground.
Speed is too high.
Plant material is ejected too
quickly.
Mowed grass was too long or
too damp.
Blade is worn.
Engine speed is too low despite
full power.
Brake is adjusted incorrectly,
worn, or defective.
Switching off system is defect-
ive.
age the tires.
Have blade resharpened and balanced
by an authorised service centre. Re-
place a damaged blade immediately.
Reduce speed and/or select the correct
cutting height.
Clean.
Check the tire pressure.
Adjust (authorised service centre).
Reduce speed.
Increase speed.
Adjust cutting height and mowing speed
to the mowing conditions.
Authorised service centre.
Authorised service centre.
Authorised service centre.
Close the fuel valve.
Authorised service centre.
If necessary, use tire protection gel (au-
thorised service centre).