AS MOTOR Ride-on-Allmaher AS 900 ENDURO Operator's Manual page 17

Cutting height adjustment (A - AS 980)
The cutting height of the lawn
1
can be continuously adjusted.
2
Press the lever to the right and
adjust the lever. Release the
lever at the desired cutting
3
height.
4
Position "5" is the transport posi-
tion.
5
Seating position (B)
Press the lever (B) to the right and move the
seat to the desired position.
Lever for choke (C)
AS 900, AS 915
The choke is closed only for start up the cold
engine. As soon as the engine is running,
open the choke.
Close choke:
Pull out the lever for the
choke (C) to the front.
Open choke:
Push the lever for the choke (C)
backward.
Accelerator lever with choke (F)
AS 980
With the accelerator lever, you can change
the engine speed and thus control the engine
output. When you start the device when the
engine is cold, move the accelerator lever to
choke position (choke is closed).
MIN: Minimum speed (idling).
Pull the accelerator lever all the
way up.
MAX: Maximum speed (full
throttle).
Choke: Choke closed (only for
engine start when engine is
cold). Press the accelerator
lever all the way down.
Acceleration lever (D)
AS 900, AS 915
Using the accelerator lever, you change the
engine speed.
Highest speed (full throttle):
Press the accelerator lever all
the way down.
Lowest speed (idling):
Pull the accelerator lever all the
way up.
17