Omitting The Date On The Sendpro Mailstation; Printing A Postage Correction - Pitney Bowes SendPro User Manual

Using your device
If you need further assistance, please use the Contact Us options below.

Omitting the date on the SendPro Mailstation

If you want to use a pre-printed return envelope, card or label on which the postage is prepaid, you must
print the postage without a date. This feature is only available for Meter Reply Mail with First-Class Retail
Metered classes that include: Letter, Non-Machinable Letter, Large Envelope and Postcard.
1. Tap the Settings icon.
2. Tap Date Settings.
3. Tap Remove Date.
4. Move the slider on Print date on stamp to Off.
If you need further assistance, please use the Contact Us options below.

Printing a postage correction

If you do not have enough postage on an envelope, you can add more postage directly on a blank area
on your envelope.
IMPORTANT: There is a limit of $10 per instance when you correct postage.
1. Tap the Settings icon.
2. Tap the right arrow to advance to the next page.
3. Tap Postage Correction.
4. Tap Enter Postage Amount.
5. Enter the postage amount.
6. Tap Apply.
7. Turn your envelope over to the blank side.
8. Insert the letter into the device, pushing in all the way to the back and right. The device will clamp
the letter and print postage. The power button will flash while the device is printing. The word
"Correction" is printed on the postage mark:
If you need further assistance, please use the Contact Us options below.
Pitney Bowes User Guide January 2021 20