Precautions Regarding Warranty And Specifications - Mitsubishi Electric Melsensor VS70 User Manual

Vision sensor
Hide thumbs Also See for Melsensor VS70:
Table of Contents

Advertisement

PRECAUTIONS REGARDING WARRANTY AND
SPECIFICATIONS
This product is designed and manufactured by Cognex Corporation. Note that the warranty and general specifications of this
product differ from that of programmable controller products.
• Warranty
Item
Free warranty period
Repair period after discontinuation of
manufacture
• General specifications
Item
Specifications
*1
Case
0 to 50
temperature
Ambient
-20 to 80
storage
temperature
Maximum
Less than 80% RH, no condensation
humidity
Vibration
IEC 60068-2-6: A vibration of 10 G
resistance
(10 to 500 Hz at 100 m/ with 15 mm
width) was applied to each X, Y, and Z
direction for 2 hours.
(with cables/cable plugs and
appropriate lens cover attached)
Shock
IEC 60068-2-27: 18 half sinusoidal
resistance
shocks (3 shocks for each X, Y, and Z
direction) with 80 G (800 m/ at 11
ms) were applied.
(with cables/cable plugs and
appropriate lens cover attached)
Operating
There is no danger of corrosive or
atmosphere
flammable gas and strong alkaline
substances to adhere.
Protective
IP67 (with cables connected and
structure
appropriate lens attached)
Installation
Outside of a control panel
location
*1 A vision sensor should be used in the environment where the temperature around the vision sensor is about 0 to 40 because the case
temperature is easily influenced by the environment the vision sensor is installed in.
Vision sensor
18 months after delivery or 24 months
after manufacture
7 years
Programmable controller product (Example: MELSEC iQ-R series)
Ambient operating temperature: 0 to 55 (when a base unit other than an extended temperature
range base unit is used)
Ambient operating temperature: 0 to 60 (when an extended temperature range base unit is used)
-25 to 75
95% RH, non-condensing
Compliant
with JIS B
3502 and IEC
61131-2
Compliant with JIS B 3502 and IEC 61131-2 (147 m/, 3 times each in X, Y, and Z bidirections)
No corrosive gases, flammable gases, less conductive dust
Inside a control panel
Programmable controller product (Example: MELSEC iQ-R
series)
36 months after delivery or 42 months after manufacture
7 years
Frequency
Under
5 to 8.4 Hz
intermittent
8.4 to 150 Hz
vibration
Under
5 to 8.4 Hz
continuous
8.4 to 150 Hz
vibration
Constant
Half
Sweep count
acceleration
amplitude
3.5 mm
10 times each
in X, Y, and Z
9.8 m/
directions
1.75 mm
4.9 m/
1

Advertisement

Table of Contents
loading

Table of Contents