Mitsubishi Electric Melsensor VS70 User Manual page 46

S-mount/M12 manual focus accessories
The S-mount/M12 manual focus accessories that are available for a vision sensor VS70 are as follows.
Product name
S-mount/M12 lens
Installation tool kit
Lens removal tool kit
• The installation tool kit (ISLN-7000-SMNT) is required when attaching any of the S-mount/M12 lenses in the
table above.
• Vision sensor VS70s support S-mount/M12 lenses in the table above. If a different lens is used, the
following restrictions apply.
⋅ At infinity focus, the back focal length must be 5.5 mm or greater.
⋅ At close up, the back focal length of the lens cannot be greater than 13 mm.
For the attachment procedure of an S-mount/M12 manual focus accessory, refer to the following section.
Page 64 Attachment of an S-mount/M12 manual focus lens
5 SYSTEM CONFIGURATION
44
5.6 Hardware Components and Optional Items
Model (COGNEX Remarks
model)
LM12-06-01 6 mm F2 fixed aperture lens
LM12-08-01-F2.2 8 mm F2.2 fixed aperture lens
LM12-12-01-F2.3 12 mm F2.3 fixed aperture lens
LM12-16-01 16 mm F2.5 fixed aperture lens
LM12-25-01 25 mm F2 fixed aperture lens
ISLN-7000-SMNT Adapter for S-mount/M12 lens, lens locking cone, and installation tool
ISAF-7000-TOOL Removal tool kit for autofocus lens