Mitsubishi Electric Melsensor VS70 User Manual page 57

16.
Compress the light baffle to 'key' the captive screw access holes on the light housing.
17.
Place a light cover on the light housing.
18.
Align the central clear region of the light cover with the light baffle edges.
19.
Insert four M3 × 12 mm screws, and tighten them using a 2 mm hex wrench in the order of one to four shown in the
following figure.
1
3
The maximum tightening torque is 0.31 N⋅m.
4
2
6 SYSTEM CONSTRUCTION
6.3 Attachment of a Lens and Light
6
55