Chapter 2 Part Names - Mitsubishi Electric Melsensor VS70 User Manual

2
PART NAMES
Connectors
The part names and functions of each connector are shown below.
Item Name Function
(1) PWR connector An M12 connector, which provides connections to an external power supply, image acquisition trigger input, general-purpose
input, and high-speed outputs using a breakout cable or an I/O module cable. (Page 25 Breakout cable specifications, Page
26 I/O module cable specifications)
(2) LIGHT connector Connects a vision sensor to an external lighting device. (Page 23 External light cable specifications)
(3) ENET connector Connects an Ethernet cable, which provides 10Base-T/100Base-T/1000Base-T Ethernet connectivity. (Page 24 Ethernet
cable specifications)
Indicator and buttons
The names and functions of each indicator and button are shown below.
Ite Name
m
(1) Focus metric LED
(2) TRIG button
(3) Power LED
(4) SD memory card status LED
(5) PASS/FAIL LED
(6) Network status LED
(7) Error LED
(8) TUNE button
*1 The status can be changed by setting "Inputs/Outputs" in In-Sight Explorer. (Page 27 Function List)
(1)
(2)
(1)
(2)
TRIG
(3) (4) (5) (6) (7)
Function
Indicates an image focus score (0 to 10) while in the live video mode within In-Sight Explorer.
A trigger is started by pressing this button when:
• The vision sensor is set to offline in In-Sight Explorer.
• The vision sensor is set to online, and "Manual" is selected from "Trigger" under "Set Up Image" in In-Sight
Explorer.
Indicates the power supply status.
• ON (green): Powered ON
• OFF: Powered OFF
Indicates the status of an SD memory card.
• ON (green): SD memory card is present (in an unusable state).
• ON (yellow): SD memory card is present (in a usable state).
• OFF: SD memory card is not inserted.
The LED turns ON in red or green by changing the setting in In-Sight Explorer.
The LED can be set not to turn ON.
By default, the LED does not turn ON because no setting is configured.
Indicates the link status.
• Flashing (yellow): Linking-up
• OFF: Linking-down
The LED turns ON in red by changing the setting in In-Sight Explorer.
By default, the LED does not turn ON because no setting is configured.
Unsupported
(3)
(8)
TUNE
*1
*1
2
2 PART NAMES
13