Mitsubishi Electric Melsensor VS70 User Manual page 30

Function name
Functions
Vision Tools
Geometry
Graphics
Mathematics
Text
Coordinate Transforms
Input/Output
Clocked Data Storage
Vision Data Access
Structures
Scripting
*1
Focus
Snippets
*1 This menu is displayed only when an autofocus module is attached to a vision sensor.
4 FUNCTIONS
28
4.1 Function List
Description
To control a vision sensor and perform an inspection.
To locate parts or inspect products with functions such as Pattern Match, ID, Blob, Edge, InspectEdge, Image,
Flaw Detection, or OCV/OCR.
To create a geometrical figure with dots and lines, and calculate the distance and angle between dots, circles,
and lines.
To create an operator interface by editing contents displayed when operating a vision sensor.
To create a formula with arithmetical functions, logical functions, statistical functions, and trigonometric
functions equipped by default.
To format alphanumeric data character strings that are displayed in the spreadsheet and are used for the
communication between a vision sensor and a remote device.
To convert the location and distance of the feature between image, fixture, and world coordinate system.
To control the method for a vision sensor to communicate with a remote device via Ethernet connection or
serial port connection.
To acquire one data from consecutive data every time an event occurs and the spreadsheet is updated.
To extract values from data structures, functions, and references of other cells.
To create graphics, fixture, mask, and region that can be used for other functions.
To provide the functions to perform a script by JavaScript. JavaScript source code can be created and edited
on the spreadsheet.
To provide the method to automatically or manually adjust the focus of a lens in a vision sensor that supports
autofocus.
A group of functions or parameters combined according to their faculty.