UPS5000-E-(30 kVA-120 kVA)-FM
User Manual
2.
Step 7 After confirming that the UPS is intact, remove the front and rear L-shaped brackets that
secure the UPS to the pallet, and secure the sliding plate to the pallet using the two M12 bolts
removed before.
Figure 3-5 Removing the L-shaped bracket
Issue 01 (2020-04-27)
Check that all fittings comply with the packing list. If some fittings are missing or do not
comply with the packing list, record this information and contact your local Huawei
office immediately.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
51