Sony HKCU-HB10 Maintenance Manual page 79

Page Menu / Menu Image
C02 MONITOR1
<MONITOR 1>
CHARACTER
WHITE-LEVEL : 71.5%
BLACK-LEVEL :
PIX CHARACTER
WHITE-LEVEL : 75.0%
BLACK-LEVEL :
C03 MONITOR2
<MONITOR 2>
LEVEL-GATE : OFF
Y-LEVEL1 49%~ 61% -12
Y-LEVEL2 74%~ 108% -25
SKIN-GATE : OFF :
MODURATION : OFF :
MARKER : OFF
: VISTA
C04 I/F SETUP
<I/F SETUP>
BOARD FRONT
SLOT1:DRX-5 => HIF-25
SLOT2:DRX-8 => HIF-57
SLOT3:DRX-5 => HIF-26
SLOT4:EN-159A=> VDA-64A
SLOT5:EN-159B=> VDA-64B
SLOT6:(NONE) => VDA-64C
REAR PREVIEW : MOMENTARY
C05 MIC/AUDIO
<MIC/AUDIO>
CHU MIC GAIN: (LOCAL)
CH1 : 60dB
CH2 : 60dB
MIC OUT
DELAY :
ANALOG OUT : MIC1/2
AES/EBU OUT: MIC1/2
AUDIO PACKET: AUTO (900)
[|||||]: The settings in the box are default values.
HKCU-HB10
Item
CHARACTER
?C02 TOP
WHITE-LEVEL
BLACK-LEVEL
0.0%
PIX CHARACTER
0.0%
WHITE-LEVEL
BLACK-LEVEL
LEVEL-GATE
?C03 TOP
Y-LEVEL1
0
0
Y-LEVEL2
SKIN GATE
MODURATION
MARKER
BOARD
?C04 TOP
SLOT1
SLOT2
REAR
SLOT3
SLOT4
SLOT5
SLOT6
D-SUB15
CHARA/SYNC
REAR PREVIEW
CHU MIC GAIN
C05 TOP
CH1
CH2
0FS
MIC OUT
DELAY
ANALOG OUT
AES/EBU OUT
AUDIO PACKET
Setting Description
Sets white/black level for the character of
0.0% to 107% 71.5%
the MONITOR output.
0.0% to 107% 0.0%
Sets white/black level for the character of
the PIX output.
0.0% to 107% 71.5% Displays only when the analog encoder
board (HKCU1001/1003) is attached.
0.0% to 107% 0.0%
OFF /1/2/1&2
Sets the mode for the CCU Y-LEVELGATE
function.
0% to 49% to 64% to Sets upper and lower levels for Level-
108% Gate 1 detection.
_99 to _25 to +99
Sets the Zebra levels added to the
Level-Gate 1 detection width.
Sets upper and lower levels for Level-
0% to 74% to 108% to
Gate 2 detection.
108%
_99 to _25 to +99
Sets the Zebra levels added to the
Level-Gate 2 detection width.
Turns ON/OFF Gate display for
OFF /ON
SkinTone Detail detection.
_99 to 0 to +99
Sets SKIN GATE level.
Turns ON/OFF the mask function for
OFF /ON
outside the 4:3 monitor frame in the EDGE
CROP mode.
_99 to 0 to +99
Sets the image level of the mask portion
OFF /ON Turns ON/OFF the MARKER signal.
4:3
13:9
14:9
EU VISTA
VISTA
CINEMA
FOLLOW DC
FRONT / REAR Detects and displays the board attached
BOARD NAME DISPLAY to front/rear of Slots 1 to 6 (HDCU1000) or
BOARD NAME DISPLAY Slots 1 to 3 (HDCU1500).
BOARD NAME DISPLAY
BOARD NAME DISPLAY
BOARD NAME DISPLAY
BOARD NAME DISPLAY
(WFM-REMOTE)/ Displays the D-SUB 15-pin connector
(MIC-REMOTE) settings. (HDCU1500)
(CHARACTER)/(SYNC) Displays the CHARA/SYNC terminal
output settings. (HDCU1500)
MOMENTARY /TOGGLE Selects the operation mode for the REAR
PREVIEW output.
(REMOTE/LOCAL) Displays local/remote for the camera
microphone amplifi er settings.
Sets amplifi er gain for MIC-1 circuit.
20/30/40/50/ 60dB
Sets amplifi er gain for MIC-2 circuit.
20/30/40/50/ 60dB
0 to 3840Fs Sets audio output phase for the camera
microphone.
Selects the MIC OUT ANALOG output.
MIC1/2 /AES/EBU
Selects the MIC OUT DIGITAL output.
MIC1/2 /AES/EBU
AUTO /700/900 Selects the Audio Packet operation mode.
4-13 (E)