Sony HKCU-HB10 Maintenance Manual page 12

4. Remove the 11 screws of the rear panel.
n
Remove the screws with
panel.
5. Disconnect the harness from the connector
CN104 on the SDP-12 board.
6. Disconnect the power cable of the optical
multi cable assembly from the connector CN1
on the CN-2718 board.
7. Detach the rear panel assembly in the arrow
direction.
8. Disconnect the harness from the connector
CN15 on the CN-2672/2672G board.
9. Disconnect the fl exible card wire from the
connector CN14 on the CN-2672/2672G
board.
1-6 (E)
marks on the rear
SDP-12 board SDP-12 board
Harness Harness
(CAMERA) (CAMERA)
Flexible card wire Flexible card wire
CN-2672/2672G board CN-2672/2672G board
Harness (ETHER) Harness (ETHER)
CN104 CN104
B3 x 5 B3 x 5
CN1 CN1
(CN-2718 board) (CN-2718 board)
Harness Harness
(CAMERA) (CAMERA)
CN15 CN15
CN14 CN14
B3 x 5 B3 x 5 B3 x 5 B3 x 5
Flexible card wire Flexible card wire
Power cable Power cable
Rear panel assembly Rear panel assembly
HKCU-HB10