Sony HKCU-HB10 Maintenance Manual page 69

Page Menu / Menu Image
6 System Diag 1
*System Diag 1/3*
Optical Condition
CAMERA OK
CCU OK
Fan Power OK
Timer 56H
CCU Power AC OK
SerialNo 00002002
7 System Diag 2
*System Diag 2/3*
CAMERA Cable Connect
Data OK
Power OK
RCP/CNU Cable Connect
Data OK
Power OK
8 System Diag 3
*System Diag 3/3*
Intercom
CCU
CAMERA CH1 ENG
CH2 PROD
CHU MIC Gain Local
CH1 60dB
CH2 60dB
9 Network Diag 1
*Network Diag 1/3* 6/20
MacAddress 00014A-xxxxxx
Auto Negotiation: ON
Auto Mdix
Connect Speed
Duplex Mode
MDI/MDIX Select : MDIX
Link Status
10 Network Diag 2
*Network Diag 2/3* 7/20
NS Mode : MCS
MCS Mode : CLIENT
CCU No. : (1 )
Master IP Address
192.168. 0.100
11 Network Diag 3
*Network Diag 3/3* 8/20
IP Addr :192.168. 0.101
NetMask :255.255.255. 0
Def GW :192.168. 0.254
HKCU-HB10
Item
Optical Condition
3/20
CAMERA
CCU
Fan Power
Timer
CCU POWER
Serial No.
CAMERA
4/20
Cable
Data
Power
RCP/CNU
Cable
Data
Power
Intercom
5/20
CCU setting
CAMERA Setting
Private
MIC OFF
CHU MIC Gain Setting
MIC OFF
MacAddress
Auto Negotiation
Auto Mdix
Connect Speed
: ON
: 100M
Duplex Mode
: FULL
MDI/MDIX Select
Link Status
: OK
NS Mode
MCS Mode
CCU No.
Master IP Address
IP Addr
NetMask
Def GW
Description
Displays the levels of received light from the optical signals of
the camera and HDCU, the status of the power unit, and the
serial number.
Displays the connection status and power status for the
connected camera and HDCU, and for the devices connected
to remote connectors of HDCU and HDCU.
Displays the setting of the intercom and camera microphone.
MAC address of this unit.
Displays auto negotiation setting.
Displays auto MDIX setting.
Displays the connection speed setting.
Displays the duplex mode setting.
Displays MDI/MDIX setting.
Ethernet connection status.
Displays the remote connector and the Ethernet connector
setting.
Displays the superior-subordinate relationship for the Ethernet
control setting.
Displays the CCU number setting.
IP address of the master device.
Displays the IP address setting.
Displays the netmask setting.
Displays the default gateway setting.
4-3 (E)