Sony HKCU-HB10 Maintenance Manual page 55

3-1. HKCU-HB10
3-1-1. Replacing the Optical multi
Cable Assembly (HKCU-HB10)
1. Remove the rear panel assembly (HKCU-
HB10). (Refer to Section 1-3-1.)
2. Remove the four screws to detach the fi ber
cable cover and the cover (SDP-16).
3. Release the two optical fi ber cables and the
harness (2P) from the two harness clamps.
HKCU-HB10
Section 3
Replacement of Main Parts
Fiber cable cover Fiber cable cover
B3 screws B3 screws
Harness (2P) Harness (2P)
B3 screws B3 screws
Cover (SDP-16) Cover (SDP-16)
Harness clamp Harness clamp
Optical fiber cables Optical fiber cables
3-1 (E)