Sony HKCU-HB10 Maintenance Manual page 71

Page Menu / Menu Image
18 Slot 4 Board Diag
*EN-A(Slot4) Diag* 15/20
Front Power:OK
PLD Version:1.00 Done
Mode :Normal
Rear:VDA-A
19 Slot 5 Board Diag
*EN-B(Slot5) Diag* 16/20
Sub-Ref:None
Unknown
Front Power:OK
PLD Version:1.00 Done
Mode :Normal
Rear:VDA-B
20 Slot 6 Board Diag
*Slot-6 Diag*
Front None
Rear :VDA-C
21 SDP Board Diag
*SDP Diag*
PLD Status
RX-PLD Version:1.00
TX-PLD Version:1.00
Config Done
SDP Mode
Power
22 Camera Diag
*CAMERA Diag*
ALL BOARD OK
23 ROM Version
*ROM Version*
CHU HDC1000
3.00
CCU HDCU1000
3.00
HKCU-HB10
Item
POWER
PLD
MODE
Rear
POWER
Power:OK
Sub-Ref
POWER
PLD
MODE
Rear
POWER
Power:OK
POWER
17/20
PLD
MODE
Rear
POWER
PLD Version
18/20
Mode
Power
:Done
:Normal
:OK
(Camera Board,
19/20
Diag Display)
CHU Version
20/20
CCU Version
10.04.02
10.04.02
Description
HDCU1000 only
Displays the status of the board attached to the optional
board for Slot 4 (front/rear).
The display content varies depending on the board installed in
the optional slot.
HDCU1000 only
Displays the status of the board attached to the optional
board for Slot 5 (front/rear).
The display content varies depending on the board installed in
the optional slot.
HDCU1000 only
Displays the status of the board attached to the optional
board for Slot 6 (front/rear).
The display content varies depending on the board installed in
the optional slot.
Displays the PLD Version and the status of the SDP board.
Displays the results of the automatic diagnostics for each board
of the camera.
"ALL BOARD OK" is displayed if there are no abnormalities in
the automatic diagnostics.
ROM version information for the connected camera.
ROM version information for the main unit.
4-5 (E)