Sony HKCU-HB10 Maintenance Manual page 16

24. Attach two heat transfer sheets to the SDP-16
board with its darker-color side facing up.
25. Attach the supplied two Soft Shields at the
location shown in the fi gure.
26. Attach the heatsink with fi ve screws.
27. Set the switch S4 (MONI) on the DRX-5
board in slot 1 on the front side to OFF.
(Refer to Section 1-2.)
28. Set the switch S4 (MONI) on the DRX-5
board in slot 2 on the front side to ON.
(Refer to Section 1-2.)
29. Install the upper cover and the front panel by
reversing steps 1 to 2.
1-10 (E)
Heat transfer sheets Heat transfer sheets
Soft shields Soft shields
S4: OFF S4: ON S4: OFF S4: ON
B3 x 5 B3 x 5
(80 mm) (80 mm)
(80 mm) (80 mm)
1 1 2 2 3 4 5 6 3 4 5 6
Slot Slot
Heatsink Heatsink
HKCU-HB10