Sony HKCU-HB10 Maintenance Manual page 21

3. Remove the four screws and remove all the
blank panels.
n
When the option board is mounted in slot 2 or
a subsequent slot, remove the option board.
4. Remove the eight screws of the rear panel.
n
Remove the screws with
panel.
5. Disconnect the power cable of the optical
multi cable assembly from the power supply
unit.
6. Disconnect the harness from the connector
CN104 on the SDP-12 board.
7. Remove the SDP-12 board from the MB-
1072/1072G board, to detach the rear panel
assembly.
HKCU-HB10
marks on the rear
MB-1072/1072G board MB-1072/1072G board
2 2
3 3
Connector of power unit Connector of power unit
Harness (ETHER) Harness (ETHER)
SDP-12 board SDP-12 board
Rear panel assembly Rear panel assembly
Blank panels Blank panels
B3 x 5 B3 x 5
B3 x 5 B3 x 5
Power cable Power cable
CN104 CN104
B3 x 5 B3 x 5
B3 x 5 B3 x 5
1-15 (E)