Table of Contents
Advertisement
2.22 "my Security" – How does it work?
The user can activate this feature within the Leica customer portal - myWorld. To activate the user must
define a connection interval to myWorld (e.g. every 3 months). If the instrument is not connected on
time (or before) the instrument gets blocked and cannot be used anymore unless it is connected to
myWorld. Within myWorld the owner of the instrument can flag the instrument as stolen. Instruments
flagged as stolen cannot be registered – once this is tried the IP location is logged and stored in SAP.
2.23 "my Security" – Can I protect my current FlexLine with this mechanism?
Yes, this is possible by installing onboard firmware version 3.0 or higher. However please note that the
protection level is not as high as with FlexLine plus units, as it is possible to load older firmware that this
mechanism does not support. On FlexLine plus total stations it is not possible to upload older firmware
versions than 3.0
2.24
Firmware concept: Is the new FlexField plus concept different to the current ?
Basically no. Changes have been made like change of icons, re-organization of the main menu. Inside the
application the workflow has not been changed. Some functionality has been added as part of the
Software Maintenance.
2.25
Onboard Data Structure: Did the way, data are stored change ?
No, the data are stored in the same way and formats as before. It is possible to import and export data
of previous firmware versions.
2.26
Operating System: does full Windows CE run on TS09plus?
No, FlexLine plus instruments are using WinCE 5.0 Core version as base operating system.
2.27
Upgrades: Can I upgrade my existing FlexLine instrument with a Colour-&Touchscreen?
No, existing instruments cannot be upgraded. To support Colour- & Touchscreen there are also changes
on the mainboard required.
2.28
Upgrades: Can I upgrade my existing FlexLine EDM from R400 to a R500?
No this is not possible.
2.29
Upgrades: Can I upgrade my existing FlexLine to a FlexLine plus?
No this is not possible.
2.30
EDM: Why did you rename the EDM measurement modes?
The previously called "fast" mode was improved to achieve an accuracy of 2mm+2ppm, which is at a level
of competitors precise mode. Leica`s EDM IR measurement accuracy is superior (1.5mm+2ppm). To create
a higher awareness of this USP the measurement mode names changed.
Prism Mode
Old name
Standard
Precise+
Fast
Precise-Fast
Tracking
Tracking
New name
FAQ - FlexLine plus V.4.5.doc
Non-Prism mode
Old name
Standard
Precise
Tracking
Tracking
New name
Page 13/18
Advertisement
Table of Contents
