Opus Atlas 300 mono User Manual page 3

4
2 DESCRIPTION
2 DESCRIPTION
2
5
2
2
4
4
4
4
6
7
8
8
9
3
3
HEALTH & SAFETY
IMPORTANT HEALTH & SAFEGUARDS
• Before operating the equipment read the Health & Safety precautions, manufacturers
• Before operating the equipment read the Health & Safety precautions, manufacturers
recommendations and the operation/user manual.
recommendations and the operation/user manual.
• T he operation/user manual should be easily available at any time for the operator. • The operation/user manual should be easily available at any time for the operator.
• The equipment must be kept away and out of reach of children.
• T he equipment must be kept away and out of reach of children.
• Equipment must be protected against dust and damp and should be positioned on
• E quipment must be protected against dust and damp and should be positioned on a strong
a strong and sturdy flat surface.
and sturdy flat surface.
• While binding, do not put fingers into the binding slot.
• Be careful when moving the equipment, binding tools can slide out of the Storage slots
• W hile binding, do not put fingers into the binding slot.
(HEAVY) !
• Be careful when moving the equipment, binding tools can slide out of the Storage slots (HEAVY)!
• Pay attention the de-binding wedge has sharp edges.
• P ay attention the de-binding wedge, it has sharp edges.
• The machine must not be used for any other purposes other than those indicated in the
• T he equipment must not be used for any other purposes other than those indicated in the operating/user manual.
operating/user manual.
• I t is necessary to check and supervise if the equipment is being used and operated correctly,
before reporting any malfunctions or problems to the service department or dealer.
• Equipment must not be located outside or operated in temperatures under 8°C/46.4°F and must be
operated in accordance with the general Health & Safety rules failure to do so could cancel
the guarantee.
11
12
1
OPUS Atlas 300 mono • User guide
Atlas 190 • User guide
DESCRIPTION - Atlas 300 mono
2
12
11
12 13
4
4
3
1 - handle
2
2
1
2 - adjusting lever
3 - binding slot
4 - hooks
5 - de-binding wedge (MB),
5
5
de-Binding Adapter for channels
5
5
1.5 and 3mm only
6 - channel width selecting tool
7 - magnetic guiding bar
8 - guide & bind bar (thin)
9 - guide & bind bar (thick)
10 - side stop
11 - adjustable side stop
12 - extended back support
10
9
10
8/9
8
3
3
6
7
8
9
Atlas 300 mono • User's guide
1 - Handle
1 - Bind and de-binding handle
2 - Clamping lever
2 - Clamp lever
3 - Binding slot
3 - Binding slot
4 - De-binding hooks 4 - Hooks
11
12
1
10 11
5 - De-binding wedge (MB),
5 - De-binding wedge (MB)
6 - De-Binding Adapter for
6 - De-Binding Adapter for
channels 1.5 and 3mm only
1
7 - Channel width selecting tool channels 1.5 and 3mm only
4
8 - COVER guide
7 - Channel width selecting tool
9 - Fixed guide
8 - Binding bar (thin)
10 - Fixed side stop
10
11 - Adjustable side stop 9 - Binding bar (thick)
12 - Extended back support
10 - Cover guide
3
11 - Side stop
12 - Adjustable side stop
13 - Extended back support
3
1
6
6
11
1 - handle 6
2 - adjusting lever
3 - binding slot
4 - hooks
9
9 10 8/9
5 - de-binding wedge (MB),
de-Binding Adapter for channels
1.5 and 3mm only 11
6 - channel width selecting tool
7 - magnetic guiding bar
8 - guide & bind bar (thin)
9 - guide & bind bar (thick)
3
10 - side stop
11 - adjustable side stop
12 - extended back support
3
3
4
EN
2
7
7
7
8
8b
6
11
7
12
7
11
8
8/9
3
EN
11
GB
5
1 - handl
2 - adjust
3 - bindin
4 - hooks
5 - de-bin
10
de-Bin
1.5 an
6 - chann
7 - magne
8
8 - guide
9 - guide
3
10 - side st
11 - adjust
12 - extend
9
7
3
3
2