Opus Atlas 300 mono User Manual page 2

Contents:
1
METALBIND SYSTEM
2
DESCRIPTION
3
IMPORTANT HEALTH & SAFEGUARDS
4
SYMBOLS
IMAGE PRESS DEVICE
9
IMAGE PRESS DEVICE
- HEALTH & SAFTY INSTRUCTIONS
10
PREPARATION TO WORK
11
PREPARING TYPEFACE FONTS
12 PREPARING THE MATRIX
1
METALBIND SYSTEM
Atlas 300 mono binding equipement was designed to bind documents with
channels and covers from the Metalbind system (available from OPUS). After as-
sembling the Image Press device it is possible also to hot print stamp on covers.
Metalbind
1
2
This is the strongest binding method
because covers and pages are clamped and healed together from the outside by channel
1 - The back wall of the channel is bent in to clamp the covers together.
2 - Special coverings for hot print stamping.
3 - Shaped front edge to keep a perfected flat face to the front of the presentations.
4 - The internal pages are protected against damage by the covers from the channel.
5 - The front face of the channel is never misshaped always flat.
6 - The special protrusions (on selected channels) at each end help to centre covers and papers of the
presentation document and stop them moving sideways in the channel.
1
14
15
3
4
5
6
2
5
PREPARATION TO WORK
6
BINDING METALBIND
7
DE-BINDING METALBIND
8
C-BIND SYSTEM
13
HOT PRINT STAMPING ON COVERS
HOT PRINT STAMPING ON
O.CHANNELS FOR BINDING
TECHNICAL DATA